Home › Phone Repair Shop / Kiosk Risk Assessment
Phone Repair Shop / Kiosk Risk Assessment — Generated Instantly for £29
Describe your repair shop or kiosk — soldering, battery handling, chemicals, workbench setup. We generate a fully written, UK-compliant risk assessment covering fire, COSHH and electrical safety in minutes.
Built for independent phone repair shops, mobile repair kiosks and accessory retailers across the UK
🔋 Handling swollen or damaged lithium batteries? Mention it — we'll include specific fire prevention and safe disposal controls for lithium battery risks.
Legal requirements for phone repair shops and kiosks
Under the Health and Safety at Work etc. Act 1974, every employer has a general duty to ensure, so far as reasonably practicable, the health and safety of employees and anyone affected by the business, including customers visiting your shop or kiosk. Regulation 3(1) of the Management of Health and Safety at Work Regulations 1999 requires a suitable and sufficient risk assessment covering all significant hazards, including soldering, chemical use and battery handling.
The Control of Substances Hazardous to Health Regulations 2002 (COSHH) apply to cleaning agents, flux and adhesive removers commonly used in repair work. Where staff use mains-powered test equipment and soldering irons, the Electricity at Work Regulations 1989 require that equipment is maintained in a safe condition to prevent danger. A documented risk assessment helps demonstrate compliance to landlords, centre management and enforcing authorities.
The Regulatory Reform (Fire Safety) Order 2005 requires the responsible person for the premises to carry out a fire risk assessment, which is particularly relevant where batteries, chargers and soldering equipment are stored and used in a small enclosed unit.
How It Works
1. Describe your shop or kiosk
Tell us whether you operate a shop or a centre kiosk, the repair work you carry out, and any chemicals, soldering equipment or battery handling involved.
2. Let the app take the strain
Anyrisks produces a fully written, UK-compliant risk assessment referencing COSHH, fire safety and electrical regulations relevant to your business.
3. Instant download and use
Download as PDF and Word. Display it in your shop, send it to centre management, or file it for insurance purposes. £29, no subscription.
What it covers
Every phone repair shop or kiosk risk assessment is written in full — covering all relevant hazards for a small repair business.
Soldering fumes and heat — ventilation and extraction controls
Small cutting tools, screwdrivers and precision blades
Lithium battery handling — swelling, damage and fire risk
Safe storage and disposal of damaged batteries
COSHH — isopropyl alcohol, flux and adhesive removers
Electrical safety of soldering irons and test equipment
Manual handling of stock deliveries and display units
Workstation setup and repetitive fine motor tasks
Fire risk from charging equipment and stored batteries
Slips, trips and cramped working in small kiosk units
Public liability and customer safety in shop or kiosk space
Cash handling and lone working for sole traders
Waste electrical equipment (WEEE) disposal
First aid provision for cuts and burns
Works for
From high street shops to shopping centre kiosks, Anyrisks covers every type of phone and device repair business.
Anyrisks vs DIY templates
| Anyrisks | DIY / Templates | |
|---|---|---|
| Written in full — not a blank form | ✓ | ✗ |
| Lithium battery fire risk included | ✓ | ✗ |
| COSHH for solvents and adhesives referenced | ✓ | ✗ |
| Covers both shops and kiosk units | ✓ | ✗ |
| Fire Safety Order 2005 referenced | ✓ | ✗ |
| Electrical safety of test equipment covered | ✓ | ✗ |
| Ready in under 2 minutes | ✓ | ✗ |
| Instant PDF and Word download | ✓ | Sometimes |
Frequently asked questions
Do I need a risk assessment for a phone repair shop or kiosk?
Yes. Under Regulation 3(1) of the Management of Health and Safety at Work Regulations 1999, every employer and self-employed person must carry out a suitable and sufficient assessment of risks to employees and customers. If you employ five or more people, the assessment must also be recorded in writing, though it is good practice to document it regardless of headcount.
What are the main hazards in a phone repair business?
The main risks are from soldering fumes and heat, small cutting tools and screwdrivers, battery handling (including swelling or damaged lithium batteries), use of chemicals such as isopropyl alcohol and adhesive removers, cramped workbenches in kiosks, electrical safety of test equipment, and manual handling of stock deliveries.
Is lithium battery handling covered?
Yes. Describe how you store, test and dispose of damaged or swollen batteries and the assessment will include controls for fire risk, safe storage away from ignition sources, and compliance with waste battery disposal requirements under the Waste Batteries and Accumulators Regulations 2009.
Does this cover COSHH for cleaning agents and adhesives?
Yes. Isopropyl alcohol, adhesive removers and flux cleaners used in phone repair work are covered under the Control of Substances Hazardous to Health Regulations 2002 (COSHH). The assessment will reference safe storage, ventilation and PPE for these substances.
I run a kiosk in a shopping centre — does that change anything?
Mention that you operate from a kiosk and the assessment will address the specific constraints of a small, enclosed unit shared with public foot traffic, including fire escape routes, electrical safety of multiple plugged-in devices, and public liability considerations relevant to centre management requirements.
Does it cover display screen equipment and repetitive work?
Yes. If staff spend long periods at a workbench performing repetitive fine motor tasks, the assessment covers postural risks, workstation setup and the need for regular breaks, in line with general duties under the Health and Safety at Work etc. Act 1974.
Will it cover fire safety for a small retail unit?
Yes. Soldering equipment, charging devices and stored batteries all present fire risks. The assessment includes fire prevention measures and references the Regulatory Reform (Fire Safety) Order 2005, which requires the responsible person to carry out a fire risk assessment.
How long does it take to generate?
Under 2 minutes. Describe your shop or kiosk, the repair work you carry out, and any specific equipment or chemicals used, and Anyrisks produces a complete, regulation-referenced risk assessment instantly as PDF and Word.
Also see: The Ultimate Guide to Risk Assessment · Do I Need a Risk Assessment? · Risk Assessment Legal Requirements · AI Risk Assessment Generator