Home › Trade › Mobile Mechanic Risk Assessment
Mobile Mechanic Risk Assessment — Generated Instantly for £29
Describe your mobile mechanic service — the types of repairs, where you work, whether you use jacks or ramps, and the substances you handle. We generate a fully written, UK-compliant mobile mechanic risk assessment covering all hazards from vehicle lifting to battery acid in minutes.
Used by sole trader mobile mechanics, fleet service providers and mobile repair businesses across the UK
🔧 Working under raised vehicles? Mention it — we'll include vehicle lifting and securing procedures, axle stand inspection, wheel chocking, and emergency controls in the event of jack or stand failure under the Provision and Use of Work Equipment Regulations 1998.
Legal requirements for mobile mechanics
The Management of Health and Safety at Work Regulations 1999 require every employer and self-employed person conducting a trade or business to carry out a suitable and sufficient risk assessment. Regulation 3(1) applies to mobile mechanics working alone or with employees. The assessment must identify hazards, evaluate risks, and record the control measures in place.
Mobile mechanics face significant risks from vehicle lifting and working underneath raised vehicles. The Provision and Use of Work Equipment Regulations 1998 (PUWER) require that jacks, axle stands, ramps and other lifting equipment are suitable for the task, properly maintained, and used correctly. Regulation 4 requires that equipment is only used for operations and under conditions for which it is suitable. A written risk assessment must document how you ensure lifting equipment is safe before each use.
Handling battery acid, brake fluid, engine oil, refrigerant and cleaning solvents brings mobile mechanics under the Control of Substances Hazardous to Health Regulations 2002 (COSHH). Regulation 6 requires an assessment of the health risks from exposure to hazardous substances and the implementation of control measures, including PPE, ventilation, safe storage and spill procedures.
Mobile mechanics typically work alone at customer locations, which triggers duties under HSE guidance on lone working. While not a standalone regulation, the duty of care under the Health and Safety at Work Act 1974 requires that employers and self-employed individuals ensure the health and safety of lone workers through check-in procedures, emergency communication, and risk-specific controls. Commercial customers, fleet operators and insurers routinely require written evidence of your risk assessment before allowing mobile mechanics on site or onto their vehicles.
How it works
1. Describe your service
Tell us the types of repairs you carry out (brakes, servicing, diagnostics, clutch replacement), where you work (customer driveways, commercial sites, fleet depots), whether you work under raised vehicles, and the tools and substances you use. If you work alone, mention it and we will include lone working controls.
2. Let the app take the strain
Anyrisks produces a fully written, UK-compliant mobile mechanic risk assessment referencing MHSWR 1999, PUWER 1998, COSHH 2002 and HSE guidance on lone working and vehicle repair.
3. Instant download and use
Download as PDF and Word. Send it to customers, fleet operators or facility managers, include it in your insurance documentation, or file it for compliance purposes. £29, no subscription.
What it covers
Every mobile mechanic risk assessment is written in full — covering all mechanical, chemical and site hazards relevant to your service.
Vehicle lifting with jacks, axle stands and ramps — inspection and securing procedures
Working under raised vehicles — crush risk and emergency procedures
Manual handling of tyres, batteries, engines and heavy components
COSHH — battery acid, brake fluid, engine oil, refrigerant, solvents and de-greasers
Hot surfaces — exhaust systems, engines and braking components
Sharps and cuts — metal edges, broken springs, sharp tools
Electrical systems — battery disconnection, hybrid and electric vehicle precautions
Fire risk — fuel system work, hot work, flammable liquids and spark ignition
Lone working at customer locations — check-in procedures and emergency access
Working on public driveways and near traffic — vehicle positioning and signage
Confined spaces — working in engine bays, under dashboards or in footwells
Noise and vibration — power tools, impact guns and air compressors
Waste disposal — used oil, batteries, tyres, brake pads and duty of care under Environmental Protection Act 1990
PPE — gloves, eye protection, high-visibility clothing and steel toe-cap boots
Works for
From routine servicing to clutch replacement and diagnostics, Anyrisks covers every type of mobile mechanic service.
What customers say
"Fleet operators now ask for RAMS before they let me near their vans. Anyrisks gave me a proper document covering jacks, battery acid, lone working — everything I actually do. First job paid for it three times over."
Dean W.
Sole trader mobile mechanic, West Midlands
"I work on customer driveways and industrial sites. The assessment covered both — public liability, vehicle positioning, working near traffic, and all the mechanical hazards. Exactly what I needed for my insurance."
Stuart M.
Mobile mechanic and diagnostics specialist, South East
"Commercial customers want to see a written risk assessment before you start. Anyrisks gave me something I could send over straight away — references all the regulations and looks professional."
Gary P.
Mobile fleet mechanic, North West
Anyrisks vs DIY templates
| Anyrisks | DIY / Templates | |
|---|---|---|
| Written in full — not a blank form | ✓ | ✗ |
| PUWER, COSHH and MHSWR regulations referenced | ✓ | ✗ |
| Vehicle lifting and securing procedures included | ✓ | ✗ |
| Battery acid, brake fluid and COSHH controls | ✓ | ✗ |
| Lone working and site-specific controls | ✓ | ✗ |
| Environmental controls and waste duty of care | ✓ | ✗ |
| Ready in under 2 minutes | ✓ | ✗ |
| Instant PDF and Word download | ✓ | Sometimes |
Frequently asked questions
Do I need a risk assessment if I'm a sole trader mobile mechanic?
Yes — under the Management of Health and Safety at Work Regulations 1999, all employers and self-employed people conducting a trade or business must carry out a risk assessment. This applies whether you work alone or employ others. Customers, insurers and fleet operators may also require written evidence of your risk assessment before allowing you to work on their premises or vehicles.
Does it cover working under vehicles with jacks and axle stands?
Yes — mention that you work under raised vehicles and the assessment will include controls for vehicle lifting, securing with axle stands, wheel chocking, inspection of lifting equipment, and emergency procedures in the event of vehicle collapse.
What about battery acid, brake fluid and other hazardous substances?
Yes — describe the substances you use (battery acid, brake fluid, engine oil, refrigerant, de-greaser) and COSHH controls will be included. The assessment will reference the Control of Substances Hazardous to Health Regulations 2002 and specify PPE, ventilation, spill procedures and safe storage.
Can I use this if I work at customer homes, industrial sites or fleet depots?
Yes — describe where you typically work (residential driveways, commercial premises, industrial yards, fleet depots) and site-specific controls will be included, such as lone working procedures, site access, working near public areas, and liaison with site managers or facility teams.
Does it cover mobile welding or fabrication work?
Yes — if you carry out welding, cutting or fabrication as part of your mobile service, mention it in your description and hot work controls will be included, covering fire risk, fume extraction, spark guards, and compliance with the Provision and Use of Work Equipment Regulations 1998.
How quickly can I get my risk assessment?
Under 2 minutes. Describe your mobile mechanic service — the types of repairs you carry out, where you work, whether you work alone, and any specific tools or equipment you use — and Anyrisks generates a complete, regulation-referenced mobile mechanic risk assessment instantly.
Will this satisfy insurance and commercial customer requirements?
Yes — Anyrisks produces a professional, fully written risk assessment in the format expected by insurers, fleet operators, facility managers and commercial customers. It references UK health and safety legislation and follows HSE guidance for mobile work and vehicle repair.
Does it include environmental controls like oil spills and waste disposal?
Yes — mention that you handle waste oil, batteries, tyres, brake pads or other waste streams and environmental controls will be included, covering spill kits, containment, licensed waste carriers, and compliance with the Environmental Protection Act 1990 and waste duty of care.
Also see: The ultimate guide to risk assessment · Do I need a risk assessment? · Risk assessment legal requirements · Risk assessment generator