Home › TV Aerial and Satellite Installation Risk Assessment
TV Aerial and Satellite Installation Risk Assessment — Generated Instantly for £29
Describe the job — roof type, access method, property type, and any overhead cables nearby. We generate a fully written, UK-compliant risk assessment covering work at height, ladder safety and electrical hazards in minutes.
Used by self-employed aerial installers, satellite engineers and communal system contractors across the UK
📡 Working on a pitched roof or near overhead power lines? Mention it — we'll include specific fall prevention measures, exclusion zones and ladder or scaffold access controls tailored to your job.
Legal requirements for aerial and satellite installers
TV aerial and satellite installation is fundamentally a work-at-height activity, distinct from general electrical work. The Work at Height Regulations 2005 require anyone working from roofs, ladders or towers to avoid work at height where possible, and where it cannot be avoided, to use the right equipment and controls to prevent falls — the leading cause of workplace fatalities according to HSE statistics.
Regulation 3(1) of the Management of Health and Safety at Work Regulations 1999 requires every self-employed installer to carry out a suitable and sufficient risk assessment before starting work. This must cover ladder and roof access, weather conditions, manual handling of dishes and brackets, and proximity to overhead power cables. A written risk assessment is increasingly requested by letting agents, facilities managers and building owners before installers are allowed on site.
Electrical safety is also relevant where mains power is used for cabling, amplifiers or test equipment, and the Electricity at Work Regulations 1989 apply to any live electrical work carried out as part of the installation. Anyrisks assessments reference the correct regulations for the specific job you describe.
How it works
1. Describe the job
Tell us the roof type, access method (ladder, tower scaffold, cherry picker), property type, and whether there are any overhead cables or shared communal systems involved. If you work alone, mention it and lone working controls will be included.
2. Let the app take the strain
Anyrisks produces a fully written, UK-compliant risk assessment referencing the Work at Height Regulations 2005 and other relevant legislation for your specific job.
3. Instant download and use
Download as PDF and Word. Hand it to your client, letting agent or managing agent, or file it for your own compliance records. £29, no subscription.
What it covers
Every TV aerial and satellite installation risk assessment is written in full — covering all height, access and electrical hazards relevant to your job.
Work at height on pitched and flat roofs
Ladder access, footing and securing procedures
Fall arrest and fall prevention equipment
Roof ladders, hooks and edge protection
Tower scaffold and cherry picker use
Proximity to overhead power lines and exclusion zones
Weather-related stop-work criteria (wind, rain, ice)
Manual handling of dishes, brackets and cable drums
Electrical safety for mains-powered amplifiers and test kit
Public safety and pedestrian exclusion at ground level
Loft and cavity access for cable routing
Communal and multi-dwelling satellite system access
Lone working on domestic and remote sites
Chimney stack and flue condition assessment before fixing
Works for
From single domestic dishes to communal block installations, Anyrisks covers every type of aerial and satellite job.
What customers say
"I work on chimney stacks and pitched roofs every day. Anyrisks covers the ladder access and fall prevention side properly, not generic electrical waffle."
Dean R.
Self-employed aerial installer, Yorkshire
"We install communal satellite systems on blocks of flats. Managing agents now ask for a risk assessment before every visit — this gets one done in minutes."
Karen L.
Satellite systems contractor, Greater Manchester
"Overhead cables near the roofline are a real hazard on some jobs. Anyrisks flagged the exclusion zone requirements without me having to think about it."
Josh T.
TV aerial engineer, South Wales
Anyrisks vs DIY templates
| Anyrisks | DIY / Templates | |
|---|---|---|
| Written in full — not a blank form | ✓ | ✗ |
| Work at Height Regulations 2005 referenced | ✓ | ✗ |
| Ladder, roof ladder and tower scaffold access covered | ✓ | ✗ |
| Overhead power line exclusion zones included | ✓ | ✗ |
| Weather-related stop-work criteria included | ✓ | ✗ |
| Covers domestic and communal block installations | ✓ | ✗ |
| Ready in under 2 minutes | ✓ | ✗ |
| Instant PDF and Word download | ✓ | Sometimes |
Frequently asked questions
Also see: The Ultimate Guide to Risk Assessment · Do I Need a Risk Assessment · Risk Assessment Legal Requirements · Risk Assessment Generator
Do I need a risk assessment for TV aerial and satellite installation work?
Yes. Under Regulation 3(1) of the Management of Health and Safety at Work Regulations 1999, every self-employed installer and employer must assess the risks of their work. Roof and ladder access make this a genuine work-at-height activity, and the Work at Height Regulations 2005 require a written assessment wherever falls could cause injury.
Does this cover working on pitched roofs and chimneys?
Yes. Describe the roof type, pitch and access method (ladder, tower scaffold, roof ladder or cherry picker) and the assessment will include the specific fall prevention and fall arrest controls required, referencing the Work at Height Regulations 2005.
What about electrical risks from overhead cables near the roof?
Overhead power line proximity is one of the most serious risks in aerial installation. Mention any nearby overhead cables and the assessment will include exclusion zones and precautions in line with HSE guidance GS6 on avoiding danger from overhead lines.
Is weather exposure included as a hazard?
Yes. Wind, rain and ice significantly increase fall risk during roof and ladder work. The assessment includes weather-related stop-work criteria and safe working limits appropriate to external installation work.
Does it cover satellite dish alignment and signal testing equipment?
Yes. Manual handling of dishes, mounting brackets and signal meters, along with the electrical safety of test equipment, are covered alongside the core work-at-height and access risks.
Can I use this for domestic and commercial installations?
Yes. Describe the property type — domestic roof, block of flats, commercial premises or communal dish system — and the assessment will be tailored to reflect the access, height and public safety considerations of each.
Is ladder safety covered specifically?
Yes. Ladder inspection, correct footing and securing, the 1-in-4 angle rule and restrictions on ladder use for prolonged work are all referenced, in line with HSE guidance on safe use of ladders and stepladders.
How long does it take to generate?
Under 2 minutes. Describe the installation job and Anyrisks produces a complete, regulation-referenced risk assessment covering work at height, electrical safety and equipment use instantly.