Home › Events › Funfair Risk Assessment
Funfair Risk Assessment — Generated Instantly for £29
A funfair risk assessment in the UK must cover mechanical ride safety, electrical supply, public interaction, emergency procedures and site-specific hazards — required under the Health and Safety at Work Act 1974 and expected by local authorities, insurers and venue owners. Anyrisks produces a complete, UK-compliant funfair risk assessment in minutes covering all rides, stalls and attractions you describe.
Used by travelling showmen, funfair operators, council event teams and community groups across the UK
🎡 Operating mechanical rides? Mention ride types, electrical setup, crowd barriers and emergency stop procedures — we'll include PUWER compliance, electrical safety under the Electricity at Work Regulations 1989, and public safeguarding measures required by the HSE.
Legal requirements for funfairs and travelling fairs
The Health and Safety at Work Act 1974 requires employers and self-employed operators to ensure, so far as is reasonably practicable, the health and safety of workers and members of the public. For funfairs, this includes ride safety, electrical installations, manual handling during setup, and protection of the public from moving machinery and electrical hazards.
The Management of Health and Safety at Work Regulations 1999 (Regulation 3) require a suitable and sufficient risk assessment covering all foreseeable hazards. For funfairs, this means assessing risks from mechanical rides, temporary electrical installations, crowd movement, food hygiene (where applicable), fire safety, and adverse weather conditions for outdoor events.
The Provision and Use of Work Equipment Regulations 1998 (PUWER) apply to all mechanical rides and equipment. Regulation 5 requires equipment to be suitable for the purpose and maintained in a safe condition. Mechanical rides must be inspected annually by a competent person under the ADIPS (Amusement Device Inspection Procedures Scheme) or equivalent — the risk assessment complements but does not replace statutory inspections.
The Electricity at Work Regulations 1989 require all electrical systems to be constructed and maintained to prevent danger (Regulation 4). Funfairs using generators, temporary distribution boards and long cable runs must include RCD protection, safe cable routing to prevent trip hazards and damage, and isolation procedures during setup and breakdown.
Local authorities issuing licenses for funfairs and travelling fairs under the Local Government (Miscellaneous Provisions) Act 1982 routinely request a written risk assessment covering all activities and attractions on site. Venue owners, insurers and the HSE also expect documented risk assessments. A comprehensive, regulation-referenced funfair risk assessment is an operational necessity and legal requirement — not optional.
How it works
1. Describe your funfair
Tell us the type of event (village fete, Christmas fair, school fundraiser, travelling fair), the rides and attractions involved (waltzers, dodgems, helter skelter, inflatables, hook-a-duck, tombola, food stalls), the venue type (village green, car park, indoor sports hall), and electrical setup (generator, mains supply, distribution boards). Mention crowd size and any special considerations like working at height for ride assembly.
2. Let the app take the strain
Anyrisks produces a fully written, UK-compliant funfair risk assessment referencing the Health and Safety at Work Act 1974, PUWER 1998, Electricity at Work Regulations 1989 and MHSWR 1999 where relevant. The assessment covers ride operation, public safeguarding, electrical safety, manual handling, weather risks and emergency procedures.
3. Instant download and use
Download as PDF and editable Word document. Submit it to the local authority for licensing, hand it to venue owners, attach it to your insurance application, or file it for HSE compliance. £29, no subscription, money-back guarantee within 24 hours.
What it covers
Every funfair risk assessment is written in full — covering all rides, attractions, stalls and site-specific hazards you describe.
Mechanical ride safety — emergency stops, barriers, operator training
PUWER 1998 compliance — annual ADIPS inspections and maintenance
Electrical safety — generators, RCDs, temporary distribution, cable routing
Public safeguarding — barriers, signage, height and weight restrictions
Setup and breakdown — manual handling, working at height, vehicle movements
Crowd management — queueing, emergency exits, stewarding
Weather risks for outdoor fairs — wind speed limits, securing gazebos, lightning
Fire safety — electrical faults, cooking equipment, LPG cylinders
Food hygiene (where applicable) — allergen controls, handwashing, waste disposal
Inflatables and soft play — anchoring, supervision, age restrictions
First aid provision — trained personnel, accessible first aid point
Emergency procedures — ride shutdown, evacuation, lost children
Contractor coordination — multiple operators on one site
Noise and nuisance — consideration for nearby residents and venue rules
Works for
From village fetes to large travelling fairs, Anyrisks covers every type of funfair event and attraction.
What customers say
"We run a travelling fair with six rides and several stalls. Anyrisks covered all the mechanical equipment, electrical setup and public safety in one document — council licensing accepted it immediately."
Tony M.
Travelling showman, East Midlands
"We organise the annual village fete with hired rides, bouncy castles and tombolas. Anyrisks gave us a comprehensive assessment covering all activities — the parish council and insurers were satisfied."
Claire H.
Community events coordinator, Yorkshire
"I operate inflatables and side stalls at school fairs and shopping centre events. Anyrisks tailored the assessment to my equipment and covered electrical safety and public interaction — saved me hours."
Darren L.
Inflatable hire operator, South East
Anyrisks vs DIY templates
| Anyrisks | DIY / Templates | |
|---|---|---|
| Written in full — not a blank form | ✓ | ✗ |
| PUWER 1998 and ADIPS compliance referenced | ✓ | ✗ |
| Covers all ride types and attractions in one document | ✓ | ✗ |
| Electrical safety under Electricity at Work Regs 1989 | ✓ | ✗ |
| Public safeguarding and crowd management included | ✓ | ✗ |
| Weather and outdoor event risks covered | ✓ | ✗ |
| Accepted by local authorities and insurers | ✓ | Sometimes |
| Ready in under 2 minutes | ✓ | ✗ |
Frequently asked questions
Do I need different assessments for each ride type?
No — describe all rides and attractions in your funfair or travelling fair (dodgems, teacups, inflatables, hook-a-duck, food stalls, etc.) and Anyrisks will produce a comprehensive assessment covering all activities. If you operate a single attraction at multiple events, one assessment can cover all sites if conditions are similar.
Does it cover both indoor and outdoor fairs?
Yes — mention the venue type (village green, car park, sports hall, school playground) and we will tailor the assessment to include weather-related risks for outdoor events or crowd management in confined indoor spaces.
What about electrical safety for rides and stalls?
Describe your electrical setup (generators, distribution boards, temporary supply) and we will include control measures for electrical safety under the Electricity at Work Regulations 1989, including RCD protection, cable routing and isolation procedures.
Is it suitable for both funfair operators and event organisers?
Yes — if you operate the funfair itself (ride operator, showman), describe your equipment and setup. If you are a council or community group hiring a funfair, describe the event and we will produce an organiser-focused assessment covering public safety, emergency access and contractor coordination.
Does it meet HSE expectations for public events?
Yes — funfair risk assessments reference the Health and Safety at Work Act 1974, Management of Health and Safety at Work Regulations 1999, and where relevant the Provision and Use of Work Equipment Regulations 1998 (PUWER). The format is accepted by local authorities, insurers and the HSE.
Can I use it for school fetes and Christmas fairs?
Yes — seasonal fairs with hired rides, tombolas, barbeques and stalls are covered. Describe the attractions and activities and Anyrisks will produce a comprehensive assessment suitable for presenting to school governors, parish councils or venue owners.
How quickly can I get it?
Under 2 minutes. Describe your funfair or event, the rides and attractions involved, and the venue type. Anyrisks generates a complete, regulation-referenced funfair risk assessment instantly.
What if rides are inspected and certified separately?
Ride operators must hold ADIPS inspection certificates for mechanical rides. The risk assessment complements this by covering operational safety, public interaction, site setup and emergency procedures — it does not replace statutory ride inspections.
Also see: The Ultimate Guide to Risk Assessment · Do I Need a Risk Assessment? · Risk Assessment Legal Requirements · Risk Assessment Generator