Trusted by 300+ UK businesses
HSE 5-Step Compliant
Checks weather forecasts, nearest A&E & more

Home › Gas Engineer / Boiler Installer Risk Assessment

Gas Engineer / Boiler Installer Risk Assessment — Generated Instantly for £29

Describe the boiler job — installation, service, repair, property type and location. We generate a fully written, UK-compliant gas engineer risk assessment covering carbon monoxide, gas escape, confined spaces and all relevant regulations in minutes.

Built for Gas Safe registered engineers, boiler installers, heating contractors and self-employed tradespeople across the UK

gas engineer boiler installation risk assessment illustration

🔥 Working on a flue, chimney breast or in a confined plant room? Mention it — we'll include carbon monoxide controls, ventilation requirements and confined space procedures specific to your job.

Legal requirements for gas engineers and boiler installers

The Gas Safety (Installation and Use) Regulations 1998 place strict legal duties on anyone who installs, services, maintains or repairs gas appliances and fittings. Regulation 3 requires that only competent persons carry out gas work, and registration with the Gas Safe Register is a legal requirement for anyone working on gas appliances in domestic and most commercial premises in Great Britain. Regulation 26 sets out specific duties for landlords, including annual gas safety checks.

The Health and Safety at Work Act 1974 and the Management of Health and Safety at Work Regulations 1999 require a suitable and sufficient risk assessment for all work activities. For gas engineers, this means documenting the risks of carbon monoxide poisoning, gas escape, fire and explosion, confined space working, and manual handling of boilers, cylinders and flue components. HSE figures consistently show that faulty gas appliances remain a leading cause of accidental carbon monoxide poisoning in UK homes, which is why documented controls are expected by landlords, letting agents and the HSE.

Where work involves lofts, under-stairs cupboards or commercial plant rooms, the Confined Spaces Regulations 1997 may also apply. Anyrisks assessments reference the relevant regulations for your specific job and setting.

How it works

Step 1 - describe the boiler job

1. Describe the job

Tell us the type of gas work — installation, service, repair or landlord safety check — the property type, boiler type and any specific hazards such as flue location or confined access.

Step 2 - AI generates your gas engineer risk assessment

2. Let the app take the strain

Anyrisks produces a fully written, UK-compliant gas engineer risk assessment referencing the Gas Safety (Installation and Use) Regulations 1998 and related legislation where relevant.

Step 3 - download your gas engineer risk assessment

3. Instant download and use

Download as PDF and Word. Hand it to your client, landlord or letting agent, or file it alongside your Gas Safe certificate for compliance purposes. £29, no subscription.

What it covers

Every gas engineer risk assessment is written in full — covering all gas, combustion and site hazards relevant to your job.

✓

Carbon monoxide poisoning — flue and ventilation checks

✓

Gas escape and emergency isolation procedures

✓

Fire and explosion risk from gas appliances

✓

Confined space working in cupboards, lofts and plant rooms

✓

Manual handling of boilers, cylinders and flue components

✓

Working at height for flue terminals and roof-mounted flues

✓

Electrical safety when working near boiler controls and wiring

✓

COSHH — flux, sealants and insulation materials

✓

Asbestos awareness in older boiler flues and ducting

✓

Hot surfaces and scalding from pipework and cylinders

✓

Lone working in domestic and commercial properties

✓

Gas Safety (Installation and Use) Regulations 1998 compliance

✓

Landlord gas safety record requirements

✓

Pressure testing and tightness testing procedures

Works for

From domestic combi boiler swaps to commercial plant room servicing, Anyrisks covers every type of gas and heating work.

Boiler installationBoiler service and maintenanceLandlord gas safety checksCombi boiler replacementSystem boiler conversionCommercial plant room servicingGas appliance repairFlue installation and inspectionCylinder installationGas cooker and fire installationCentral heating system upgradesPower flushingGas leak investigationWarm air unit servicing

Anyrisks vs DIY templates

AnyrisksDIY / Templates
Written in full — not a blank form✓✗
Gas Safety (Installation and Use) Regulations 1998 referenced✓✗
Carbon monoxide and gas escape controls included✓✗
Confined space and working at height guidance included✓✗
Covers both domestic and commercial jobs✓✗
Landlord gas safety record requirements explained✓✗
Ready in under 2 minutes✓✗
Instant PDF and Word download✓Sometimes

Frequently asked questions

Do I need to be Gas Safe registered to use this?

Yes — this risk assessment is written for registered gas engineers and boiler installers working under the Gas Safety (Installation and Use) Regulations 1998. You must be on the Gas Safe Register to legally carry out gas work in Great Britain, and this document supports your compliance paperwork alongside your registration.

Does it cover carbon monoxide risk?

Yes — carbon monoxide poisoning from faulty flues, poor ventilation and incomplete combustion is covered in every assessment, including the controls required under the Gas Safety (Installation and Use) Regulations 1998 and guidance on CO alarm placement.

Can it be used for both domestic and commercial boiler work?

Yes — describe the property type, boiler type (combi, system, regular) and whether the job is an installation, service or repair, and the assessment will be tailored to the specific job and setting, domestic or commercial.

Does it cover working in confined spaces like airing cupboards and lofts?

Yes — confined space access, restricted working positions and ventilation requirements in cupboards, lofts and plant rooms are included, alongside manual handling risks when moving boilers and cylinders.

Is gas escape and emergency procedure included?

Yes — procedures for isolating the gas supply, handling suspected gas escapes and emergency evacuation are written into the assessment, referencing the duties under the Gas Safety (Installation and Use) Regulations 1998.

Will it be accepted by letting agents, landlords and principal contractors?

Yes — Anyrisks produces a fully written, regulation-referenced risk assessment in the format expected by landlords, letting agents, facilities managers and the HSE. It is professional, specific to your job, and ready to file or hand over.

How long does it take to generate?

Under 2 minutes. Describe the boiler job — installation, service, repair or gas safety check — and Anyrisks produces a complete, regulation-referenced gas engineer risk assessment instantly as PDF and Word.

Also see: The ultimate guide to risk assessment · Do I need a risk assessment? · Risk assessment legal requirements · AI risk assessment generator

Give Anyrisks a go today.

You'll be delighted with your Risk Assessment, or your money back.