Home › Guides› Intumescent Strip & Fire Protection Installation
Intumescent Strip & Fire Protection Installation Risk Assessment — Generated Instantly for £29
Describe the fire protection installation job — intumescent strips, smoke seals, hinges, certification works. We generate a fully written, UK-compliant risk assessment covering fire door upgrade and remedial work in minutes.
Used by fire door specialists, intumescent installers and passive fire protection contractors across the UK
🔥 Working on occupied fire doors that will be temporarily out of service during works? Mention it — we'll include reinstatement controls, temporary compensating measures, and access arrangements around building occupiers.
Legal Requirements for Intumescent & Fire Protection Installation
The Regulatory Reform (Fire Safety) Order 2005 places a duty on the "responsible person" for a building to ensure fire doors and fire-resisting elements are properly maintained and function as designed. When you install or upgrade intumescent strips, smoke seals and hinges, you are directly affecting the building's fire compartmentation — meaning the quality and safety of the installation work itself carries real consequence.
The Health and Safety at Work etc. Act 1974 and the Management of Health and Safety at Work Regulations 1999 require a suitable and sufficient risk assessment for this work. Under Regulation 3(1) of MHSWR 1999, this must cover risks to your operatives and to anyone else affected, including building occupiers, tenants and members of the public who may be present while doors are temporarily disabled during fitting.
The Control of Substances Hazardous to Health Regulations 2002 (COSHH) apply to intumescent mastics, adhesives, sealants and paints used in this trade — many of which contain solvents or isocyanates requiring specific handling and ventilation controls. A written risk assessment covering these exposures is expected by principal contractors, building managers and certification bodies such as FIRAS.
How It Works
1. Describe the Job
Tell us the type of works — intumescent strip fitting, smoke seal replacement, hinge upgrades, or certification checks — the building type, occupancy level, and whether any doors will be temporarily out of use. If you work alone on site, mention it too.
2. Let the app take the strain
Anyrisks produces a fully written, UK-compliant risk assessment referencing the Regulatory Reform (Fire Safety) Order 2005, COSHH 2002 and relevant fire door standards.
3. Instant Download and Use
Download as PDF and Word. Hand it to your client, building manager, or include it in your FIRAS or third-party certification audit pack. £29, no subscription.
What It Covers
Every intumescent strip and fire protection installation risk assessment is written in full — covering all hazards specific to this specialist trade.
Intumescent strip and smoke seal installation hazards
Hinge replacement and door leaf handling
COSHH — adhesives, mastics, sealants and solvent-based products
Working on occupied fire doors — temporary loss of function
Reinstatement and compensating fire safety measures
Manual handling of doorsets and ironmongery
Working at height on tall doorsets and communal areas
Power tool use — routers, drills and chisels
Dust and debris control from door leaf preparation
Access and disruption in occupied buildings
Lone working on domestic and commercial premises
Slips, trips and falls in communal corridors and stairwells
FIRAS and third-party certification documentation requirements
Fire Safety Order 2005 compliance for compartmentation integrity
Works For
From single-door remedial visits to full-building upgrade programmes, Anyrisks covers every type of intumescent and fire protection installation work.
What Customers Say
"We do intumescent strip and smoke seal upgrades on housing blocks all week. Anyrisks gave me a proper document covering occupied buildings and COSHH for the mastic without me writing a word of it myself."
Dean R.
Fire door specialist, Greater Manchester
"Our FIRAS audit needed documented risk assessments for every job type. This covered hinge replacement and certification works exactly right, referencing the Fire Safety Order properly."
Louise M.
Passive fire protection contractor, West Midlands
"Landlords keep asking for evidence of proper procedures on our fire door remedial visits. This is quick, specific to the job, and looks the part when I hand it over."
Craig T.
Self-employed fire door installer, Yorkshire
Anyrisks vs DIY Templates
| Anyrisks | DIY / Templates | |
|---|---|---|
| Written in full — not a blank form | ✓ | ✗ |
| Fire Safety Order 2005 referenced | ✓ | ✗ |
| COSHH for adhesives and mastics included | ✓ | ✗ |
| Covers occupied building access and disruption | ✓ | ✗ |
| Specific to intumescent strip and seal fitting | ✓ | ✗ |
| Suitable for FIRAS certification audit packs | ✓ | ✗ |
| Ready in under 2 minutes | ✓ | ✗ |
| Instant PDF and Word download | ✓ | Sometimes |
Frequently Asked Questions
Is this different from a general fire door installation risk assessment?
Yes. Intumescent strip and fire protection installation covers remedial and upgrade works — fitting intumescent strips, smoke seals, hinges, and certifying existing doorsets — rather than installing new doorsets from scratch. This assessment is written specifically for that specialist retrofit and certification work, covering the unique hazards of working on live, occupied fire doors in situ.
Does it reference the correct regulations for fire door works?
Yes. The assessment references the Regulatory Reform (Fire Safety) Order 2005, the Health and Safety at Work etc. Act 1974, and relevant British Standards for fire door and intumescent seal installation, including BS 476 and BS EN 1634 test standards referenced in third-party certification schemes.
Will it cover working in occupied buildings such as flats or offices?
Yes — describe the building type and occupancy level and the assessment will include controls for working around occupiers, tenants and staff, including access arrangements, temporary loss of fire door function during works, and reinstatement procedures.
Does it cover COSHH for adhesives and intumescent products?
Yes. Intumescent mastics, adhesives and paints used in strip and seal installation are covered under COSHH 2002, and the assessment includes exposure controls, ventilation requirements and safe handling of these products.
Can it be used to support FIRAS or third-party certification audits?
Yes. Many fire door specialists operating under FIRAS or similar certification schemes need documented risk assessments as part of their quality management system. The assessment is written in a professional format suitable for audit and certification purposes.
Does it cover working at height on tall doorsets or communal areas?
Yes — mention if steps, podium steps or access equipment are required and the assessment will include working at height controls in line with the Work at Height Regulations 2005.
How long does it take to generate?
Under 2 minutes. Describe the fire protection installation job and Anyrisks produces a complete, regulation-referenced risk assessment instantly, ready to download as PDF and Word.
Also see: The Ultimate Guide to Risk Assessment · Do I Need a Risk Assessment · Risk Assessment Legal Requirements · Risk Assessment Generator