Home › Construction › Hospital Contractor Risk Assessment
Hospital Contractor Risk Assessment — Generated Instantly for £29
Working as a plumber, gas engineer, electrician or building contractor inside a hospital or NHS estate? Describe the job, the ward or department, and any access or isolation requirements. We generate a fully written, UK-compliant risk assessment covering infection control, service isolations, permits and asbestos in minutes.
Used by plumbers, gas engineers, electricians, M&E contractors and facilities teams working across NHS hospitals and estates
🏥 Working near a ward, department or clinical area? Mention it — we’ll include infection prevention and control (IPC) precautions, service isolation procedures and the permit-to-work requirements typical of NHS estates teams.
Legal Requirements for Contractors Working in Hospitals
The Health and Safety at Work Act 1974 places a duty on contractors and the NHS Trust or estates department engaging them to ensure the health and safety of workers, patients and visitors. Where the work amounts to construction — refurbishment, installation or repair — the Construction (Design and Management) Regulations 2015 (CDM 2015) apply, setting out duties for the client, principal contractor and contractor. A written risk assessment is expected before work starts.
Many NHS estates buildings pre-date 2000 and may contain asbestos-containing materials. The Control of Asbestos Regulations 2012 require a refurbishment or demolition survey before any intrusive work — drilling, cutting or removal — and this is one of the most common gaps in contractor asbestos risk assessments for hospital work. The Control of Substances Hazardous to Health Regulations 2002 (COSHH) also apply to cleaning chemicals, sealants, adhesives and dust generated on site.
Hospitals operate under NHS national infection prevention and control (IPC) guidance, and any work near clinical areas — dust, noise, vibration, ventilation disruption — must be managed to avoid risk to patients with compromised immunity. Fire safety during building work is addressed by Health Technical Memorandum HTM 05-02, which covers fire safety in the design of healthcare premises and applies to contractor work that could affect compartmentation or means of escape.
NHS estates and facilities teams typically operate their own permit-to-work systems — covering hot works, isolations of water, gas and electrical supplies, and confined space entry — which sit alongside, not instead of, your own written risk assessment. Serious injuries must still be reported under RIDDOR 2013 in the normal way.
How It Works
1. Describe the Job and the Site
Tell us your trade, the task (repair, refurbishment, inspection, installation) and which ward, department or building you’re working in — plus anything the estates team has told you about isolations or access. If you’re on an out-of-hours call-out alone, mention it and we’ll include lone working controls.
2. Let the app take the strain
Anyrisks produces a fully written, UK-compliant risk assessment referencing the Health and Safety at Work Act 1974, CDM 2015, COSHH and the Control of Asbestos Regulations 2012 where relevant.
3. Instant Download and Submit
Download as PDF and Word. Submit it to the estates or facilities management team for site access approval, or include it in your RAMS pack for the principal contractor. £29, no subscription.
What It Covers
Every hospital contractor risk assessment is written in full — covering the clinical, estate and trade-specific hazards relevant to your job.
Infection prevention and control (IPC) precautions near clinical areas
Isolating water, gas and electrical services without disrupting patient care
Hospital and NHS estates permit-to-work systems — hot works, isolations, confined space
Asbestos risk in older NHS estate buildings and the need for a refurbishment survey
Working near patients, wards and occupied departments
Dust, noise and vibration control during cutting, drilling and floor works
Clinical waste segregation and safe disposal
Fire safety and compartmentation during building work (HTM 05-02)
Site access, ID badges and induction requirements for hospital sites
Working at height and confined space entry in plant rooms and roof voids
CDM 2015 duties for refurbishment and construction work
COSHH — cleaning chemicals, sealants, adhesives and dust
Manual handling of materials through occupied corridors and wards
Emergency evacuation and continuity of critical hospital services
Works For
From reactive plumbing call-outs to full ward refurbishments, Anyrisks covers every trade working on an NHS site.
What Customers Say
“We’re in and out of hospital plant rooms most weeks. The assessment covered isolations and permit-to-work exactly how the estates team expects it — saves us rewriting the same document every time.”
Craig M.
Gas engineer, contractor, South East
“A lot of our refurbishment work is in older wings of the hospital, so asbestos is always front of mind. Anyrisks flagged the survey requirement and wrote it up properly without me having to explain it.”
Deborah H.
M&E contractor, North West
“Working near occupied wards means infection control comes up on almost every job. Having that covered automatically, alongside the usual hazards, has saved a lot of back-and-forth with the estates team.”
Imran K.
Plumbing and heating engineer, Midlands
Anyrisks vs DIY Templates
| Anyrisks | DIY / Templates | |
|---|---|---|
| Written in full — not a blank form | ✓ | ✗ |
| References CDM 2015, HSWA 1974 and asbestos regulations | ✓ | ✗ |
| Covers infection control and service isolations | ✓ | ✗ |
| Matches NHS estates permit-to-work requirements | ✓ | ✗ |
| Site-specific to your hospital or NHS estate job | ✓ | ✗ |
| Accepted by NHS Trusts, main contractors and FM companies | ✓ | Sometimes |
| Ready in under 2 minutes | ✓ | ✗ |
| Instant PDF and Word download | ✓ | Sometimes |
Frequently Asked Questions
Does this cover infection control requirements for contractor work in hospitals?
Yes — describe the ward, department or clinical area you’re working in and the assessment will include infection prevention and control (IPC) precautions, PPE and containment measures in line with NHS infection control guidance.
Do you cover asbestos risk in older NHS buildings?
Yes — many NHS estates buildings pre-date 2000 and may contain asbestos-containing materials. Mention the building age and the type of work and the assessment will reference the Control of Asbestos Regulations 2012 and the need for a refurbishment survey before intrusive work begins.
Does it include permit-to-work and isolation procedures?
Yes — describe whether the job needs hot works, water or gas isolation, or confined space entry, and the assessment will reflect the permit-to-work systems typically operated by NHS estates and facilities teams.
Is this suitable for CDM 2015 refurbishment or construction work in a hospital?
Yes — the assessment references the Construction (Design and Management) Regulations 2015 and the relevant duties of contractors working on an NHS site, whether the job is notifiable or not.
Can I use this for reactive or emergency maintenance call-outs?
Yes — describe the fault, the location and any access constraints, and Anyrisks generates a risk assessment suitable for urgent or reactive works, not just planned projects.
How long does it take?
Under 2 minutes. Describe your trade, the job and the hospital or estate site, and Anyrisks produces a complete, regulation-referenced risk assessment instantly.