Home › Solar Panel Installation Risk Assessment
Solar Panel Installation Risk Assessment — Generated Instantly for £29
Describe the installation — roof or ground-mounted, domestic or commercial, panel count and access method. We generate a fully written, UK-compliant solar panel installation risk assessment covering working at height, fragile roofs and DC electrical risks in minutes.
Used by solar installers, MCS-certified contractors and renewable energy firms across the UK
☀️ Working on a fragile or asbestos cement roof? Mention it — we'll include fragile surface precautions, crawling board requirements and the specific controls needed to prevent falls through roof lights and sheeting.
Legal requirements for solar panel installers
Solar panel installation combines three of the highest-risk activities in UK construction: working at height, roof work, and electrical installation. The Work at Height Regulations 2005 require employers and self-employed installers to avoid work at height where possible, and where it cannot be avoided, to use equipment that prevents falls. Falls from height remain the leading cause of fatal injury to UK workers according to HSE statistics, with roofing work carrying a disproportionately high share of these incidents.
The Electricity at Work Regulations 1989 apply to the DC and AC electrical systems within solar PV installations. Unlike mains AC, solar PV panels generate live DC voltage whenever exposed to light, meaning isolation is not as simple as switching off a supply — installers must follow a specific isolation and connection sequence to avoid arc flash and shock risk.
Under the Health and Safety at Work Act 1974 and the Management of Health and Safety at Work Regulations 1999, a written risk assessment is required for this type of work. Principal contractors, homeowners and commercial clients increasingly expect a documented assessment before work begins, and MCS-certified installers are expected to demonstrate suitable risk management as part of their certification.
How it works
1. Describe the job
Tell us the installation type, roof pitch and material, panel count, access method and whether battery storage is included. Mention any fragile roof areas or confined loft access.
2. Let the app take the strain
Anyrisks produces a fully written, UK-compliant solar panel installation risk assessment referencing the Work at Height Regulations 2005, the Electricity at Work Regulations 1989 and relevant manual handling guidance.
3. Instant download and use
Download as PDF and Word. Hand it to your client, keep it on-site for MCS compliance, or file it for your own records. £29, no subscription.
What it covers
Every solar panel installation risk assessment is written in full — covering working at height, electrical and handling hazards specific to PV work.
Working at height — fall prevention and edge protection
Fragile roof surfaces, roof lights and asbestos cement sheeting
Access and egress — ladders, scaffold towers and roof hatches
DC electrical risk — PV panels remain live whenever exposed to light
Isolation and connection sequencing for DC and AC circuits
Arc flash risk and insulated PPE for electrical connections
Manual handling of panels, rails, inverters and battery units
Weather conditions — wind loading, wet or icy roof surfaces
Falling objects and exclusion zones below the work area
Confined loft and roof void access for cabling runs
Fire risk from DC arcing and incorrectly terminated connections
Lone working on domestic sites with limited access to help
Battery storage installation — thermal and electrical risk
COSHH — sealants, adhesives and roof fixing compounds
Works for
From a single domestic roof install to large-scale commercial arrays, Anyrisks covers every type of solar PV work.
What customers say
"Every domestic install I quote now, homeowners ask if there's a risk assessment. Anyrisks gives me something proper covering the roof work and the DC side in a couple of minutes."
Dean R.
Solar PV installer, Yorkshire
"We install across commercial flat roofs with fragile roof lights everywhere. Anyrisks covered the fragile surface precautions and exclusion zones properly, not just a generic roofing template."
Claire B.
Commercial PV contractor, East Midlands
"MCS paperwork is a pain. Having a proper risk assessment referencing Work at Height and Electricity at Work Regs ready in minutes has saved me hours on every site file."
Ian F.
MCS-certified installer, South Wales
Anyrisks vs DIY templates
| Anyrisks | DIY / Templates | |
|---|---|---|
| Written in full — not a blank form | ✓ | ✗ |
| Work at Height Regulations 2005 referenced | ✓ | ✗ |
| Electricity at Work Regulations 1989 referenced | ✓ | ✗ |
| Covers fragile roof and DC isolation risks specifically | ✓ | ✗ |
| Covers both domestic and commercial installs | ✓ | ✗ |
| Manual handling of panels and inverters included | ✓ | ✗ |
| Ready in under 2 minutes | ✓ | ✗ |
| Instant PDF and Word download | ✓ | Sometimes |
Frequently asked questions
Does this cover both roof-mounted and ground-mounted solar installations?
Yes — describe the installation type (domestic roof, commercial flat roof, ground-mounted array) and the assessment will be tailored to the specific hazards of that layout, including fragile roof coverings, roof pitch and DC cabling routes.
Is working at height covered under the Work at Height Regulations 2005?
Yes — every solar panel installation risk assessment references the Work at Height Regulations 2005, covering fall prevention, edge protection, scaffold or tower access, and fragile roof precautions such as crawling boards and roof ladders.
Does it cover the electrical risks specific to solar PV, like DC arcing?
Yes — solar PV systems carry unique electrical risks because DC circuits cannot simply be switched off like AC mains. The assessment covers isolation sequencing, DC arc flash risk, and the Electricity at Work Regulations 1989 duties that apply to installers.
Can I use this for MCS-certified installation work?
Yes — the assessment is written to support the documentation expected under MCS (Microgeneration Certification Scheme) installer standards, alongside the standard legal risk assessment requirements that apply to all installation work.
Does it cover manual handling of panels and roof-mounted equipment?
Yes — manual handling of solar modules, mounting rails, inverters and battery storage units is included, referencing the Manual Handling Operations Regulations 1992 and the practical lifting and carrying risks on sloped or restricted roof access.
Is it suitable for both domestic and commercial/solar farm installations?
Yes — describe the project scale and type. Domestic roof installs, commercial rooftop arrays and ground-mounted solar farm installations each carry different risk profiles, and the assessment reflects the one you describe.
Will it cover working near or on fragile roof materials like asbestos cement sheeting?
Yes — mention the roof construction material and fragile roof risks, including asbestos cement sheeting and roof lights, will be included with the specific precautions required to prevent falls through fragile surfaces.
How long does it take to generate?
Under 2 minutes. Describe the installation job — roof type, panel count, electrical setup and access method — and Anyrisks produces a complete, regulation-referenced solar panel installation risk assessment instantly.
Also see: The Ultimate Guide to Risk Assessment · Do I Need a Risk Assessment · Risk Assessment Legal Requirements · AI Risk Assessment Generator