Trusted by 300+ UK businesses
HSE 5-Step Compliant
Checks weather forecasts, nearest A&E & more

Home › Recording Studio Risk Assessment

Recording Studio Risk Assessment — Generated Instantly for £29

Describe your studio — control room, live room, booths, equipment and typical sessions. We generate a fully written, UK-compliant recording studio risk assessment covering noise, electrical safety and manual handling in minutes.

Built for project studios, commercial recording facilities, sound engineers and freelance producers

recording studio risk assessment illustration

🎙️ Running live tracking sessions with bands or full kits? Mention it — we'll include additional controls for sustained noise exposure, cabling trip hazards and amplifier heat specific to live sessions.

Legal requirements for recording studios

Under Regulation 3(1) of the Management of Health and Safety at Work Regulations 1999, every employer and self-employed person must carry out a suitable and sufficient assessment of risks to employees and to anyone else who may be affected by the work, including visiting musicians, clients and freelance engineers.

The Control of Noise at Work Regulations 2005 apply directly to studio environments. The lower exposure action value is 80 dB(A) and the upper action value is 85 dB(A) — levels that are routinely reached during monitoring, mixing and live performance. Studios should record typical exposure levels and the hearing protection or listening breaks in place.

The Electricity at Work Regulations 1989 require that all electrical equipment — power amplifiers, patch bays, cable runs and extension reels — is maintained in a condition that prevents danger. Combined with the general duties of the Health and Safety at Work Act 1974, a written risk assessment is the clearest way to demonstrate these duties are being met for both staff and studio visitors.

How it works

Step 1 - describe your recording studio

1. Describe your studio

Tell us your room layout, equipment, typical session types (overdubs, mixing, live tracking) and who uses the space — staff, freelancers or visiting clients.

Step 2 - AI generates your recording studio risk assessment

2. Let the app take the strain

Anyrisks produces a fully written, UK-compliant recording studio risk assessment referencing the Control of Noise at Work Regulations 2005 and the Electricity at Work Regulations 1989.

Step 3 - download your recording studio risk assessment

3. Instant download and use

Download as PDF and Word. Keep it on file for inspections, insurance or client assurance. £29, no subscription.

What it covers

Every recording studio risk assessment is written in full — covering the hazards specific to control rooms, live rooms and booths.

✓

Noise exposure from monitors, headphones and live instruments

✓

Control of Noise at Work Regulations 2005 compliance

✓

Electrical safety — amplifiers, patch bays and cable management

✓

PAT testing of portable and outboard equipment

✓

Trip hazards from floor cabling and stands

✓

Manual handling of speakers, racks and flight cases

✓

Fire risk from electrical equipment in enclosed rooms

✓

Ventilation and heat build-up in vocal booths and control rooms

✓

Confined space considerations in isolation booths

✓

Visitor and client induction for first-time studio users

✓

Hearing protection and listening break arrangements

✓

Lone working for engineers working out-of-hours

✓

Fire exits and evacuation routes during live sessions

Works for

From bedroom project studios to commercial facilities, Anyrisks covers every type of recording setup.

Project studiosCommercial recording facilitiesMixing and mastering suitesPodcast studiosRehearsal roomsLive tracking roomsVoiceover boothsFreelance sound engineersMusic production schoolsBroadcast and radio studiosPost-production audio suitesMobile recording setups

Anyrisks vs DIY templates

AnyrisksDIY / Templates
Written in full — not a blank form✓✗
Control of Noise at Work Regulations 2005 referenced✓✗
Electricity at Work Regulations 1989 referenced✓✗
Covers live sessions and visiting clients✓✗
Tailored to your room layout and equipment✓✗
Addresses confined space booths and ventilation✓✗
Ready in under 2 minutes✓✗
Instant PDF and Word download✓Sometimes

Frequently asked questions

Do recording studios legally need a risk assessment?

Yes. Under Regulation 3(1) of the Management of Health and Safety at Work Regulations 1999, every employer and self-employed person must carry out a suitable and sufficient risk assessment of the work they do. This applies to recording studios whether you're a sole trader engineer, a small project studio or a commercial facility with staff and visiting clients.

What are the main hazards in a recording studio?

The most significant hazards are noise exposure (from monitors, headphones and live performance), electrical risk from cables, patch bays and power amplifiers, trip hazards from cabling and gear, manual handling of heavy equipment such as speakers and racks, and fire risk from electrical equipment running in enclosed, often poorly ventilated control rooms and vocal booths.

Does noise at work legislation apply to recording studios?

Yes. The Control of Noise at Work Regulations 2005 apply wherever workers are regularly exposed to loud monitoring levels, live instruments or PA systems. The lower exposure action value is 80 dB(A) and the upper action value is 85 dB(A) — levels commonly reached during mixing, mastering or live tracking sessions. Your risk assessment should record typical monitoring levels and the controls in place.

Do I need a separate assessment for live recording sessions with bands?

You don't need a separate document, but you should describe live sessions specifically when generating your assessment. Live tracking introduces additional hazards — more people in the space, instrument cables and drum kit trip hazards, amplifier heat, and higher sustained noise levels than overdub or mixing sessions.

Is electrical safety testing required for studio equipment?

The Electricity at Work Regulations 1989 require that electrical equipment is maintained to prevent danger. For portable equipment such as power amps, outboard gear, patch leads and extension reels, regular PAT testing is the practical way to demonstrate this duty is being met, particularly where visiting musicians and clients use the space.

Does this cover client and visitor safety, not just staff?

Yes — describe who uses the studio (staff engineers, freelance musicians, visiting clients, artists) and the assessment will address the duty owed to non-employees under Section 3 of the Health and Safety at Work Act 1974, including fire exits, trip hazard management and induction for first-time visitors.

How does this differ from a stage lighting or rigging assessment?

A recording studio assessment focuses on fixed indoor hazards — noise, electrical, manual handling and confined-space ventilation. If your work also involves lighting rigs, trussing or overhead equipment for live events, our stage lighting and rigging risk assessment covers those load-bearing and working-at-height hazards specifically.

How long does it take to generate?

Under two minutes. Describe your studio setup, equipment and typical session types, and Anyrisks produces a complete, regulation-referenced recording studio risk assessment ready to download as PDF and Word.

Also see: The Ultimate Guide to Risk Assessment · Do I Need a Risk Assessment · Risk Assessment Legal Requirements · AI Risk Assessment Generator

Give Anyrisks a go today.

You'll be delighted with your Risk Assessment, or your money back.