Home › Fire Extinguisher Servicing Risk Assessment
Fire Extinguisher Servicing Risk Assessment — Generated Instantly for £29
Describe your servicing round — pressurised cylinders, tools, multi-site travel, lone working. We generate a fully written, UK-compliant fire extinguisher servicing risk assessment covering every hazard your technicians face in minutes.
Used by self-employed fire extinguisher engineers, servicing companies and facilities contractors across the UK
🧯 Servicing extinguishers across multiple sites unsupervised? Mention it — we'll include lone working controls, site induction steps and pressurised cylinder handling procedures specific to your round.
Legal requirements for fire extinguisher servicing engineers
Under Regulation 3(1) of the Management of Health and Safety at Work Regulations 1999, every employer and self-employed person must carry out a suitable and sufficient risk assessment of the risks to which their employees, and anyone else affected by their work, are exposed. For a fire extinguisher servicing engineer, this means assessing the risks arising from your own activity — not the fire risk of the building you're visiting.
Extinguishers are pressurised vessels. Discharge testing, recharging, and disposal of expired agents fall under the Pressure Systems Safety Regulations 2000, while the hand tools and crimping equipment used during servicing are covered by the Provision and Use of Work Equipment Regulations 1998 (PUWER). Chemical extinguishant residues and cleaning agents fall under COSHH 2002.
Because engineers travel between client premises, often working alone and outside the direct supervision of an employer, the Health and Safety Executive treats mobile servicing work as a distinct activity requiring its own written risk assessment — separate from any fire risk assessment held by the building under the Regulatory Reform (Fire Safety) Order 2005. Anyrisks assessments are written to reflect this distinction and reference the correct regulations for the servicing activity itself.
How it works
1. Describe your servicing work
Tell us the type of extinguishers you service, the premises you typically visit, whether you work alone, and any specific tasks like discharge testing or hydrostatic pressure testing.
2. Let the app take the strain
Anyrisks produces a fully written, UK-compliant risk assessment covering pressurised cylinder handling, manual handling, COSHH and lone working — referencing the correct regulations for your activity.
3. Instant download and use
Download as PDF and Word. Hand it to your client, keep it in the van for site inductions, or file it for your own compliance records. £29, no subscription.
What it covers
Every fire extinguisher servicing risk assessment is written in full — covering the hazards specific to mobile servicing work.
Handling pressurised extinguisher cylinders during servicing
Discharge and hydrostatic pressure testing risks
Manual handling of extinguishers, spare stock and cylinders
Use of hand tools, crimping equipment and gauges
COSHH — dry powder, foam and CO2 extinguishant residues
Safe disposal of expired extinguishers and agents
Lone working across unfamiliar client premises
Site induction and access procedures on unattended visits
Slips, trips and falls when accessing wall-mounted units
Working at height for high-level extinguisher points
Vehicle loading and transport of stock and cylinders
Manual handling and fatigue over multi-site rounds
Fire and explosion risk from faulty or over-pressurised units
Pressure Systems Safety Regulations 2000 compliance
Works for
From single-site call-outs to multi-site servicing rounds, Anyrisks covers every type of fire extinguisher servicing work.
What customers say
"I visit 15-20 sites a week servicing extinguishers and clients now expect a risk assessment before I even get in the door. Anyrisks gave me something specific to my job, not a generic fire safety document."
Dave R.
Self-employed fire extinguisher engineer, Yorkshire
"We run a small servicing company and needed something covering pressurised cylinder handling and lone working for our engineers. This nailed both without any back and forth."
Karen L.
Fire safety servicing company owner, North West
"Facilities managers on the sites I visit always ask for my own risk assessment, separate from theirs. This is exactly that — quick, specific, and it's saved me having to explain the difference every time."
Tom W.
Fire extinguisher servicing engineer, South East
Anyrisks vs DIY templates
| Anyrisks | DIY / Templates | |
|---|---|---|
| Written in full — not a blank form | ✓ | ✗ |
| Covers pressurised cylinder handling risks | ✓ | ✗ |
| Distinct from building fire risk assessments | ✓ | ✗ |
| Lone working and multi-site controls included | ✓ | ✗ |
| Manual handling and COSHH covered | ✓ | ✗ |
| References the correct regulations for servicing work | ✓ | ✗ |
| Ready in under 2 minutes | ✓ | ✗ |
| Instant PDF and Word download | ✓ | Sometimes |
Frequently asked questions
Do fire extinguisher servicing technicians need their own risk assessment?
Yes. Under Regulation 3(1) of the Management of Health and Safety at Work Regulations 1999, every employer and self-employed person must assess the risks to workers arising from their work activity. Servicing pressurised extinguishers on client sites is a distinct mobile activity involving pressurised cylinders, hand tools and travel between unfamiliar premises, and it needs its own written risk assessment separate from the site's fire risk assessment.
How is this different from a fire risk assessment of the building?
A building fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005 looks at the premises itself — fire doors, escape routes, alarm systems. This assessment covers the servicing technician's own activity: handling pressurised cylinders, using crimping and discharge tools, working at height to reach wall-mounted units, and moving between multiple sites in a day. It's a service provider risk assessment, not a property assessment.
Does it cover the pressure risks from extinguisher cylinders?
Yes. The assessment addresses the specific hazards of working with pressurised vessels, including risks during discharge testing, refilling and disposal, referencing the Pressure Systems Safety Regulations 2000 and the Provision and Use of Work Equipment Regulations 1998 (PUWER) for the tools and equipment used.
Can it cover working across multiple client sites in one day?
Yes — describe your typical working pattern and the assessment will include controls for lone working, site induction procedures at unfamiliar premises, vehicle loading of stock and equipment, and manual handling of extinguishers and spare cylinders between the van and the building.
Is manual handling of extinguishers included?
Yes. Fire extinguishers range from small 1kg units to large 9kg or wheeled units, and technicians frequently carry, lift and reposition them throughout a shift. The assessment includes manual handling controls in line with the Manual Handling Operations Regulations 1992.
Does it cover COSHH risks from extinguishant chemicals?
Yes. Dry powder, foam and CO2 extinguishant residues, and cleaning agents used during servicing, are covered under COSHH 2002, with controls for exposure, ventilation and safe disposal of expired agents.
Is this suitable for sole traders as well as larger servicing companies?
Yes. Whether you're a single technician servicing extinguishers part-time alongside other fire safety work, or a company employing several engineers, describe your operation and the assessment will be tailored accordingly.
How long does it take to generate?
Under 2 minutes. Describe your fire extinguisher servicing activity and Anyrisks produces a complete, regulation-referenced risk assessment instantly, ready to download as PDF and Word.
Also see: The Ultimate Guide to Risk Assessment · Do I Need a Risk Assessment · Risk Assessment Legal Requirements · AI Risk Assessment Generator