Trusted by 300+ UK businesses
HSE 5-Step Compliant
Checks weather forecasts, nearest A&E & more

Home › Paving and Driveway Contractor Risk Assessment

Paving and Driveway Contractor Risk Assessment — Generated Instantly for £29

Describe the job — driveway, patio, pathway or car park, the surface type, and any excavation or cutting work. We generate a fully written, UK-compliant paving and driveway contractor risk assessment covering plant, dust, manual handling and site hazards in minutes.

Built for paving contractors, driveway installers, groundworkers and landscaping businesses across the UK

paving and driveway contractor risk assessment illustration

🧱 Cutting slabs, kerbs or block paving? Mention it — we'll include silica dust controls, on-tool extraction and the correct RPE required under COSHH 2002.

Legal requirements for paving and driveway contractors

Under the Health and Safety at Work etc. Act 1974, every employer and self-employed contractor has a duty to protect themselves, their workers and members of the public from harm. The Management of Health and Safety at Work Regulations 1999 require a suitable and sufficient risk assessment, under Regulation 3(1), covering excavation, plant use, manual handling and public access.

Where the job involves groundworks or sub-base preparation, the Construction (Design and Management) Regulations 2015 may apply, placing duties on contractors to manage site safety and coordinate with other trades. A written risk assessment is routinely requested by homeowners, letting agents and local authorities before work starts.

Cutting block paving, kerbs and slabs generates respirable crystalline silica dust, controlled under the Control of Substances Hazardous to Health Regulations 2002 (COSHH). The HSE has repeatedly highlighted silica exposure in construction as a cause of long-term lung disease, and expects documented controls such as water suppression, extraction and RPE wherever cutting takes place. Anyrisks assessments reference these regulations directly.

How it works

Step 1 - describe the paving or driveway job

1. Describe the job

Tell us the surface type, whether the job involves excavation, cutting or sub-base work, and whether the site adjoins a public footpath or road. Mention any plant you'll be using, such as a compactor, mini digger or cut-off saw.

Step 2 - AI generates your paving and driveway risk assessment

2. Let the app take the strain

Anyrisks produces a fully written, UK-compliant paving and driveway contractor risk assessment referencing COSHH 2002, PUWER 1998 and the relevant construction regulations.

Step 3 - download your paving and driveway contractor risk assessment

3. Instant download and use

Download as PDF and Word. Hand it to your client, keep it on site, or file it for compliance purposes. £29, no subscription.

What it covers

Every paving and driveway contractor risk assessment is written in full — covering all site and material hazards relevant to your job.

✓

Excavation and ground stability — trenches, footings and sub-base

✓

Buried and overhead services — gas, water, electricity and telecoms

✓

Respirable crystalline silica dust from cutting slabs and kerbs

✓

Plant and machinery — compactors, mini excavators, dumpers and mixers

✓

Manual handling of slabs, kerbs, aggregate and bagged materials

✓

Noise and vibration from cut-off saws and vibrating plate compactors

✓

Working near the public highway — pedestrian and traffic segregation

✓

Hot works and bitumen/tarmac burns on asphalt installations

✓

Site access, storage of materials and housekeeping

✓

Weather-related risks — rain, cold stress and UV exposure

✓

COSHH — cement, bonding agents, sealants and fuel

✓

Slips, trips and falls on uneven or part-finished surfaces

Works for

From domestic driveways to commercial car parks, Anyrisks covers every type of paving and surfacing work.

Driveway installationPatio layingBlock pavingTarmac and asphalt surfacingResin-bound surfacingNatural stone pavingKerb and edging workPathway and footpath layingCar park surfacingDrainage and soakaway installationSub-base and groundworksRepairs and resurfacing

Anyrisks vs DIY templates

AnyrisksDIY / Templates
Written in full — not a blank form✓✗
COSHH 2002 silica dust controls referenced✓✗
Excavation and buried services risks included✓✗
Plant and PUWER 1998 compliance covered✓✗
Public highway and pedestrian controls included✓✗
Covers domestic and commercial sites✓✗
Ready in under 2 minutes✓✗
Instant PDF and Word download✓Sometimes

Frequently asked questions

What regulations apply to paving and driveway contractors?

The Management of Health and Safety at Work Regulations 1999 require a written risk assessment for any business with five or more employees, and good practice for everyone else. The Construction (Design and Management) Regulations 2015 apply where the work counts as construction, and the Provision and Use of Work Equipment Regulations 1998 cover plant such as compactors, cut-off saws and mini excavators.

Does it cover working near the public highway?

Yes — if you mention that the driveway or path adjoins a public footpath or road, the assessment will include traffic management, pedestrian segregation and signage controls relevant to working near the public highway.

Is silica dust from cutting slabs and block paving covered?

Yes — cutting, grinding and sawing paving slabs, kerbs and block paving produces respirable crystalline silica (RCS). The assessment includes controls required under the Control of Substances Hazardous to Health Regulations 2002 (COSHH), such as water suppression, on-tool extraction and RPE.

Does this cover excavation and sub-base work?

Yes — mention any excavation, sub-base levelling or drainage work and the assessment will include controls for buried services, manual handling of aggregate and plant movement around excavated areas.

Can I use it for domestic and commercial driveways?

Yes — describe the site type (domestic driveway, commercial car park, public pathway) and the assessment is tailored accordingly, since public access and traffic risks differ significantly between the two.

Is it accepted by clients and local authorities?

Anyrisks produces a fully written, regulation-referenced risk assessment in the standard format expected by homeowners, property managers, principal contractors and the HSE.

Does it cover plant and machinery used on site?

Yes — plate compactors, cut-off saws, mini diggers, dumpers and mixers can all be named in your job description, and the assessment will reference the relevant controls under the Provision and Use of Work Equipment Regulations 1998.

How long does it take to generate?

Under 2 minutes. Describe the paving or driveway job and Anyrisks produces a complete, regulation-referenced risk assessment instantly.

Also see: The ultimate guide to risk assessment · Do I need a risk assessment? · Risk assessment legal requirements · AI risk assessment generator

Give Anyrisks a go today.

You'll be delighted with your Risk Assessment, or your money back.